Peening and Blasting
Shot Peening
| Price | ||
| Crankshaft | 4 cyl | £80.00 |
| Crankshaft | 6 cyl | £110.00 |
| Crankshaft | 8 cyl | £140.00 |
| Set of conrods | 4 cyl | £100.00 |
| Set of conrods | 6 cyl | £110.00 |
| Set of conrods | 8 cyl | £140.00 |
Shot Blasting
Prices are on a time taken basis and the amount of degreasing required.
Glass Beadblasting
1st Stage Wash
The Bupi hot chemical wash is used to remove the worst prior to machining, the machine has a rotating basket for the work onto which are directed numerous powerful jets of Alkaline detergent heated to 180 degrees F.
2nd Stage Wash
All oil gallery bungs are removed and components are totally immersed in the Nu-Dip tank, a strong Alkaline chemical is heated to 180F and components are oscillated up and down within the solution at 40 cycles per minute. The process time is usually 3-4 hours.
3rd Stage Wash
Final rinse after degreasing is carried out with a hot pressure washer to ensure absolute cleanliness. Components are then hot air dried and lightly oiled ready for assembly.
| Price | ||
| Chemical wash 4 cyl car block | from | £60.00 |
| Chemical wash 6 cyl car block | from | £70.00 |
| Chemical wash V8 block | from | £60.00 |
| Chemical wash V12 block | from | £70.00 |
| Chemical wash 4 cyl head | from | £30.00 |
| Chemical wash 6 cyl head | from | £40.00 |
| 3 Stage Degrease inc remove & refit oil gallery bungs, core plugs etc | ||
| Full degrease most 4 cyl car blocks | from | £80.00 |
| Full degrease most 6 cyl car blocks | from | £90.00 |
| Full degrease most V8 blocks | from | £90.00 |
| Full degrease most V12 blocks | from | £90.00 |
| Full degrease most 4 cyl heads | from | £50.00 |
| Full degrease most 6 cyl heads | from | £60.00 |